June 01, 2024 800

Electrified Strikes

  • June 1 & 2
  • 9:00 am - 5:00 pm
  • 7 Seats Available
Program Price: $800

Proof of Clean Criminal Record Check is Required.

Proof of Post Secondary or Equivalent Education Required.

The Electrified Strikes class provides the student with the knowledge required in selecting the proper electric strike based on door hardware and frame type. The student will install various electric strikes on wood, aluminum, and steel frames, as well as complete a basic access system. Most manufactures products are covered in detail. This program does not require approval under the Private Career Colleges Act, 2005.


  • Boring jig (with router)
  • Die grinder (with metal cutting blades)

Required Tools

  • Vise grips
  • Try square or combination square.
  • Taps with proper drill size for 8-32NC w/#29 drill, 10-24NC w/#25 drill, 10-32NC w#21 drill, 12- 24N
  • Tap wrench
  • Safety glasses as well as safety boots or shoes are mandatory
  • Safety glasses
  • Round 1/4" x 10" (bastard or 2nd cut)
  • Multimeter (digital preferred)
  • Jig saw (with metal cutting blades)
  • Flat file 10" or 12" (bastard or 2nd cut)
  • Extension cord
  • Electric or cordless drill
  • Drill bits Recommend student have full drill index. (Minimum 1/8, 5/32, 7/32 3/8 and 1/2).
  • Centre punch
  • Basic hand tools, (slot, Philips, Robertson) screw drivers, hammer, Allen/hex head key set (fraction
  • at least 6 course and 6 fine jigsaw blades
  • 1/4 - 20 tap